Daytime Privacy Window Film with One-Way Mirror Reflection

Available lengths: 60in, 78.7in, 10ft, 13.1ft, 16.5ft, 33ft, 66ft, 100ft, 165ft (any length can be customized, please contact us if you need). Available widths: 17.7in, 20in, 24in, 35.4in, 60in. Material: PET. Color: Blue Silver.

Features: - Self-adhesive - Anti-UV - Heat control - Sun blocking - Explosion-proof - Waterproof - Anti-friction - Hard to fade - Easy to cut, weed and press

Areas of use: Building glass, home window, DIY Window Arts, etc. Life: (based on vertical surface exposure) 3 years.

Installation Steps: 1. Trim films to the size you want (leave an extra inch is better). 2. Keep the window or glass clean and spray much soapy water. 3. Peel off the protective film (use 2 pieces of tape to apply to both sides of the corners and pull it apart). 4. Wet the adhesive side with much soapy water. 5. Set up film on glass. 6. Squeegee away water and air bubbles. 7. Cut off margins and dry the glass with a towel.

Quick Tip: In order to easily remove the protective backing film, simply use 2 pieces of tape to apply to both sides of the corners and pull. Please spray a lot of water before installation. It's better to watch the installation video of window film on YouTube before installation.

Anti-UV and Heat Control: The window film blocks out 99% of UV rays and 90% of infrared rays, protecting your skin and interior furniture. The 17% of VLT effectively reduces glare, which can provide a good nap time and daytime privacy.

100% Daytime Privacy: The window privacy mirror film provides 100% privacy during the daytime, and the outdoor window shows a mirror effect. At night, the mirror-effect is reversed since the indoor will be much brighter than the outdoor. The side with more light will have a mirror-effect, so please remember to draw curtains at night.

Self-Adhesive: This self-adhesive window privacy film is of glue design, and the adhesive strength is not strong, so you don't need to worry about leaving residue after removing. It is very sticky as long as it is sprinkled with water on the glue side and window. There is no chemical release, and it is very easy to install, just make sure the window surface is completely clean and absolutely free of any blemishes.

Installation and Application: The self-adhesive mirror window film is easy to install with much soapy water in minutes. Two people working together will be better, with one person peeling off the back film and the other person smoothing the film with a scraper from top to bottom. Do not peel off too much each time, which will reduce the bubbles. This window mirror film can be applied to any window or smooth glass surfaces at home, office, kitchen, bathroom, and classroom, etc.

product information: